DIY Carpet Cleaning: A Step-by-Step Guide

Whether it is a stain from a spilled drink or a mess made by a child or a pet, there are moments in life that call for carpet care. A dirty carpet could lead to a runny nose or bloated eyes caused by harmful particles. For your own health, the sooner the carpet gets cleaned, the better. You can hire a company that provides professional carpet cleaning, as experts would know exactly what is required. However, if your budget is tight, it is possible to do the job yourself, as outlined in the steps below.

 

Supplies

For a homemade carpet cleaning solution, you will need to start with an empty spray bottle (even a small one will do the trick) to fill with the mixture. While solutions like rubbing alcohol or shampoo can be used to remove stains, a stronger solution would be a mixture of baking soda and vinegar. The combination of baking soda and white vinegar, or the combination of a base and an acid, creates carbon dioxide that helps make the cleaning process substantially easier. In addition, you will need a dishwashing liquid, some warm water, an absorbent towel, a vacuum cleaner, and a sponge. Make sure that your sponge is clean before you start. For accurate measurements, you may need a measuring cup and a tablespoon.

 

Measurements for the Mixture

While stain sizes vary, it will be safer and provide more consistent results to use the same measurements for each batch of the cleaning solution you make. Work over your sink for safety. For white vinegar, you will need one tablespoon. For the dishwashing liquid, on the other hand, you will need one teaspoon. Once you have mixed these two ingredients into the bottle, pour in a cup of warm water. Staying ready to close the top back onto the bottle, put one teaspoon of baking soda into it and then close it very quickly as it bubbles up on the inside.

 

Cleaning

Before using the spray, run a vacuum cleaner over the stained area. After this, use the abrasive side of the sponge to rub gently against the stained area. Now you are ready to spray the mixture onto the spot on the carpet. Keep in mind that you shouldn’t use too much all at once. Use the towel to wipe and dab softly. Right away, you should be able to notice a difference in how the area looks. So just keep on dabbing until the stain goes away. Once it is gone, your carpet will look presentable once again to residents or visitors. After this experience, you can confidently take care of other future carpet stains.

 

Consider DIY Carpet Cleaning

DIY carpet cleaning can save you lots of time and money in the long run. However, if you find DIY carpet cleaning difficult, or are too busy to experiment with homemade cleaning solutions, then the best carpet cleaner is from a qualified company such as SteamCo. SteamCo lets you know upfront how much the damage would cost, and relieves you of extra stress. No matter the size or severity of the stain, SteamCo is there to help you figure out which treatment is best for your carpet.